Artículo: AMZ-B07D13QWV9

innomaker

InnoMaker HiFi DAC HAT for Raspberry Pi 5/4/3B+/Zero | PCM5122 384kHz/32bit DAC Audio Card Expansion Board | Dual Oscillators & DOP | RCA/3.5mm Output, 112dB SNR

Detalles del producto
Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
Condición
Nuevo
Producto de
Amazon
Viaja desde
USA

Sobre este producto
  • Professional-Grade Audio Upgrade for Raspberry Pi The InnoMaker HiFi DAC HAT transforms your Raspberry Pi into a high-fidelity audio source, delivering studio-quality sound at 1/10 the cost of dedicated music players. Engineered with the TI PCM5122 reference DAC and dual ultra-low-jitter oscillators (45.158MHz/49.152MHz), this expansion board eliminates Raspberry Pi's inherent clock jitter for pristine audio reproduction. Key Features & Technical Advantages 384kHz/32bit High-Resolution Audio: PCM5122 reference DAC with 112dB SNR and -78dB THD+N outperforms standard Pi audio outputs Jitter-Free Master Clock Architecture: Dual precision oscillators replace Raspberry Pi's unstable clock source Dual Professional Outputs: Gold-plated RCA line-out (2.1Vrms) + TPA6133 headphone amp (138mW@32Ω) Film Capacitor Coupling: Ensures minimal signal distortion across 8kHz-384kHz sampling range Direct GPIO Connection: No soldering or external cables required - plug and play in seconds DSD over PCM (DOP) Support: Native playback of high-resolution DSD files Universal Compatibility Hardware: Raspberry Pi 5/4/3B+/3B/Zero/Zero W (40-pin models) OS & Software: Volumio | Moode Audio | RuneAudio | LibreELEC | OSMC | PiCorePlayer | Raspberry Pi OS (Debian/Ubuntu) Audio Formats: FLAC, ALAC, WAV, AIFF, DSD (via DOP), MP3, AAC Technical Specifications - DAC Chip: Texas Instruments PCM5122 - Sample Rates: 8kHz to 384kHz - Dynamic Range: 112dB (A-weighted) - THD+N: -78dB @ -1dBFS - Output Voltage: 2.1Vrms (RCA), 1.7Vrms (Headphone) - Headphone Output Power: 138mW @ 32Ω - Frequency Response: 20Hz-20kHz (±0.1dB) - Connectors: Stereo RCA + 3.5mm Headphone Jack - Additional Interfaces: IR remote port (GPIO26 reserved) Plug-and-Play Setup 1. Mount the DAC HAT directly onto Raspberry Pi's 40-pin GPIO header 2. Configure audio output via OS settings (step-by-step guide in manual) 3. Connect to amplifier via RCA or headphones via 3.5mm jack Integrated EEPROM enables automatic detection on HAT-compatible OS. Package Contents 1x InnoMaker HiFi DAC HAT Installation manual with InnoMaker Wiki support link Developer Resources & Support Open-source SDK and documented API available for custom integrations. Technical documentation and configuration guides accessible via InnoMaker Wiki (link included in manual). Notes Raspberry Pi board not included Acrylic case sold separately: B07RTW8YH5 12-month warranty against manufacturing defects
$58,44
31% OFF
$40,30

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

$58,44
31% OFF
$40,30

20% OFF adicional al pagar con Deuna

Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en

Conoce más detalles

【Direct-Connect HiFi DAC Expansion Board】Seamlessly integrates with Raspberry Pi 5, 4, 3B+, Zero & Zero W via 40-pin GPIO. No soldering or external wiring needed – unlock studio-grade audio at 10% of traditional cost. Features 384kHz/32bit PCM5122 DAC with dual ultra-low jitter oscillators (45.158MHz/49.152MHz). 【Reference-Class Audio Engineering】TI PCM5122 reference DAC delivers 112dB SNR and -78dB THD+N, coupled with film capacitors for pristine RCA/3.5mm outputs. Master-clock mode eliminates Raspberry Pi jitter, supporting DSD over PCM (DOP) and 8kHz-384kHz sampling. 【Universal OS & Software Support】Tested with Volumio, Moode, RuneAudio, LibreELEC, and Raspberry Pi OS. Stream high-res audio via network/NAS/USB storage. Onboard EEPROM enables plug-and-play configuration. 【Professional Dual-Output Interface】Gold-plated RCA line-level outputs (2.1Vrms) + dedicated headphone amp (138mW@32Ω via TPA6133). Independent grounding eliminates crosstalk for studio monitors or high-impedance headphones. 【Developer-Optimized Design & Support】Features ultra-low-noise power regulation + reserved IR port (GPIO26). Compliant with Raspberry Pi HAT specs, with open-source SDK, documented API, and technical support via InnoMaker Wiki (link in manual).