Artículo: AMZ-B07D3LQLBT

RGBZONE

RGBZONE 5V USB RGB LED Controller, IR Wireless Remote Control, 1M(3.3FT) 4-PIN LED Controller, 5V 5050 2835 5630 LED Strip Lights

Style:

4PIN-IR-24Keys

4PIN-IR-17Keys

4PIN-IR-24Keys

Detalles del producto
Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
Condición
Nuevo
Producto de
Amazon
Viaja desde
USA

Sobre este producto
  • Specifications: Working temperature: -20-60℃ Suooly voltage: DC5V Product size: L62xW35xH23mm Package size: L105xW65xH55mm Net weight: 60g Gross weight: 70g Output: Three CMOS drain-open output Connecting Mode: Common anode Max load current: 2 A each color Warning: 1.Supply voltage of this product has been DC5V never connect to DC220V. 2.Never connect two wires directly in case of short circuit. 3.Lead wire should be connected correctly according to colors that connecting diagram offers. 4.Warranty of this product is one year, in this period we guarantee replacement or repairing with no charge, but exclude the artificial situation of damaged or overload working. Low voltage operation, can be compatibly used on any device of USB interface. Not for safety concerns. Please be sure of your power adapter amps are suitable for your led strips Package Included: 1 × 24Key USB Remote Controller For led strips. ONLY for 5V led strip.
$28,16
49% OFF
$14,44

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

$28,16
49% OFF
$14,44

20% OFF adicional al pagar con Deuna

Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en

Conoce más detalles

Working voltage: DC 5V, the light strip and power supply must both be 5V (Input voltage 5V = Output voltage 5V). Simple connection, easy control, remote control distance is 10 meters. 16 Colors, adjustable brightness, On/Off, 5 Light Patters: Flash, Strobe, Fade, RGB Smooth-change, Static.16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change. IR Remote. The volts of the power supply must correspond to the volts of the strip light!!!If very dim, only displays red color. Please check if the strip light voltages is the same as the power volts. Connect the light strip with 4 pin plug on the one side, and plug it into the USB port that anyone can drive it. [ONLY suitable for 5V led strip with 5V power supply] Tips: Because the line order of each factory RGB light strip is not uniform, our controller line sequence is RGB. The problem that the controller does not correspond to the strip light can be solved. First, turn off the switch, then press the button in the lower right corner, the strip light will flash, then press the three keys RGB to adjust to the color you want, if it does not correspond for the first time, repeat it a few times.