ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire
Color:
ESP32-CAM+FT232RL
En stock
0.20 kg
Sí
Nuevo
Amazon
USA
- Specifications:- IO Port: 9- SPI Flash: Default 32Mbit- RAM: Internal 520KB + External 4M PSRAM- Power Supply Range: 5V 2A- Bluetooth: Bluetooth 4.3 BR/EDR and BLE standard- WiFi: 820.11 b/g/n/e/i- Support Interface: UART/SPI/I2C/PWM- Support TF Card: Maximum 4G- Serial Port Rate: Default 115200 bps- Image Output Format: JPEG (Only OV2640 support), BMP, GRAYSCALE- Spectrum Range: 2412-2484MHZ- Antenna Form: Onboard PCB antenna, gain 2dBi- Transmit Power: 820.11b: 17±2dBm (@11Mbps); 820.11g: 14±2dBm (@54Mbps); 820.11n: 13±2dBm (@MCS7)- Safety: WPA/WPA2/WPA2-Enterprise/WPSFTDI USB To TTL Serial Converter:Chip: FT232RL, not genuine FTDI chipPin definition: DTR, RXD, TX, VCC, CTS, GNDOperating Voltage: 3.3V and 5VPitch: 2.54mmSize: 40 x 18mm (L x W)Interface: Mini USBSupport: Win95/98/98se/ME/2000/XP/win7 32bit 64bit /Vsita/, Do not Support Win8XD / TXD transceiver communication indicatorJumper Wires:Pitch: 2.54mmEach cable length: 20CMMaterial: high-grade copper wireType: Female-FemalePackage Included:1 * Mini WiFi + Bluetooth Module1 x OV2640 camera1 * FTDI USB To TTL Serial Converter
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
Conoce más detalles
ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard; Wi-Fi: 802.11 b/g/n/e/i; Support Interface: UART, SPI, I2C, PWM; Support TF Card: Maximum support 4G Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse. This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC; Supports OV2640 and OV7670 cameras.