KAUF A21 RGBWW Smart Bulb with ESPHome, Compatible with Tasmota, Made for Home Assistant

Item Package Quantity:

Detalles del producto

Disponibilidad
Sin stock

Peso con empaque
0.11 kg

Devolución
No

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

The KAUF RGBWW Smart Bulb is made for Home Assistant. ESPHome is baked in, so connecting the bulb to Home Assistant over Wi-Fi is quick and easy. The bulb has five separate LED channels, so any RGB color can be selected as well as a wide range of white shades from cool to warm. For Tasmota, you can use the following template: {"NAME":"Kauf Bulb", "GPIO":[0,0,0,0,416,419,0,0,417,420,418,0,0,0], "FLAG":0, "BASE":18, "CMND":"SO105 1|RGBWWTable 204,204,122,153,153"} Power-On Behavior: This Wi-Fi smart bulb is designed to remain powered on at the wall switch and be controlled via app, voice assistant, or automation. When power is removed and reapplied using a traditional wall switch, the bulb may take up to ~1 second to illuminate while it initializes. Repeated power cycling may briefly display a yellow reset indicator. This is normal behavior. No hardware changes are required.

Sin stock

Seleccione otra opción o busque otro producto.

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

Five independently controllable LED channels: Red, Green, Blue, Warm White, and Cold White. Runs ESPHome out of the box for 100% local control without flashing, soldering, editing YAML, or hoping tuya-convert works. Connects natively to Home Assistant without going through a cloud connection or requiring a third-party App to setup or connect the bulb. ESPHome HTTP API allows use without Home Assistant. Reprogrammable with other ESP8266-compatible firmwares. Easily integrates into any existing MQTT system. Compatible with Tasmota. Flashing of WLED bin files is not supported, as WLED does not support both 1MB flash and Over-the-Air flashing. Please do not try to flash a WLED bin file on these bulbs. KAUF Smart Bulb Update v1.7 adds WLED support into the stock firmware. A21 bulb shape slightly larger than most standard bulbs, E26 base is typical for most US bulbs. Firmware version 1.7 adds support for controlling the bulb from WLED or xLights via DDP. Firmware version 1.8 adds options to adjust max power and fade length.