Garantía de entrega
Artículo: AMZ-B0FCXP2T18
MTDELE
MTDELE 1Pcs BME280 5V Precision Pressure Sensor Module Compatible with Arduino Temperature Humidity Module
Detalles del producto
Disponibilidad
En stock
En stock
Peso con empaque
0.42 kg
0.42 kg
Devolución
Sí
Sí
Condición
Nuevo
Nuevo
Producto de
Amazon
Amazon
Viaja desde
USA
USA
Sobre este producto
- Model: BME280The BME280 sensor is an upgraded version of the BMP085/BMP180/BMP183, with low altitude noise down to 0.25 meters and equally fast conversion speed.They have the same specifications, but can use I2C or SPI interface. For easier wiring, choose the I2C interface. If you want to connect a large number of sensors without worrying about I2C address conflicts, choose the SPI interface.Parameters:Power supply voltage: VDD Main power supply voltage range: 1.71 V to 3.6 V (Note: 5V to 3.3V regulator is required. Direct access to 5V power supply may damage the chip)Air pressure range: 300-1100hPaTemperature: -40 to +85°CHumidity: 0-100%Interface: I2C (up to 400kHz); SPI (up to 10 MHz)Optional I2C address jumper (solder connection GS2), I2C pull-up resistor, 7-pin 2.54 mm interface and two 3.5 mm mounting holesDefault settings: single power supply Vdd=Vdd_IO (solder connection GS1), pull-up resistor (R2, R3) 10kΩ, protocol selection resistor (R1) 0ohm, 0.1uF decoupling capacitors are connected to both Vdd and Vdd_IO power pinsIf you connect the development board to two power pins VDD_IO 1.8V and VDD 3.3V, be sure to remove the power jumper GS1Features:Digital interface: I2C (up to 400kHz) and SPI (3-wire and 4-wire, up to 10 MHz)Supply voltage: VDD main supply voltage range: 1.71 V to 3.6 VVDDIO interface voltage range: 1.2 V to 3.6 VNote: The logic level of the BME280 chip itself is 3.3V, and it needs to pass through a 5V to 3.3V regulator. Direct access to a 5V power supply may damage the chipCurrent consumption: 1.8 uA @ 1 Hz humidity and temperature2.8 uA @ 1 Hz pressure and temperature3.6 uA @ 1 Hz humidity, pressure and temperature0.1 uA (sleep mode)Operating temperature range: -40…+85°C, 0-100% RH Humidity, 300-1100 hPa - Humidity sensor and pressure sensor can be enabled/disabled independentlyThe BMP280 is an environmental sensor that combines temperature and pressure measurement for all weather sensing applications, supporting I2C and SPI interfaces.This sensor is an optimal low-cost precision sensing solution, with an absolute accuracy of ±1 hPa for pressure and ±1.0°C for temperature. Since pressure varies with altitude and the measurement is excellent, you can also use it as an altimeter with an accuracy of ±1 meter.
$24,62
49% OFF
$12,62
IMPORT EASILY
By purchasing this product you can deduct VAT with your RUT number
$24,62
49% OFF
$12,62
20% OFF adicional al pagar con Deuna
Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja
de USA ![]()
a tus manos en
![]()
a tus manos en
Conoce más detalles
BME280 temperature and humidity module: compatible with Arduino temperature and humidity module Power supply voltage: VDD Main power supply voltage range: 1.71 V to 3.6 V (Note: 5V to 3.3V regulator is required, direct access to 5V power supply may damage the chip) Air pressure range: 300-1100hPa Temperature: -40 to +85°C;Temperature: -40 to +85°C Interface: I2C (up to 400kHz); SPI (up to 10MHz)
Compra protegida
Disfruta de una experiencia de compra segura y confiable
![]()
Garantía de entrega
Con Tiendamia todas tus compras cuentan con Garantía de Entrega o devolución total de tu dinero.
Compras 100% seguras y garantizadas, para que pidas lo que sueñas y lo recibas del mundo a tu puerta.
Tarjetas de Débito y Crédito
Visa
Mastercard
American Express
Dinners
Discover
Alias
Pagos a través de PayPal
Compra procesada en dólares con dinero en cuenta o tarjetas internacionales.
PayPal
.svg)
