6PCS Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display for DIY Charger USB Welded

Color:

6PCS Weld

12PCS NO Weld

12PCS Weld

6PCS NO Weld

6PCS Weld

Detalles del producto

Disponibilidad
En stock

Peso con empaque
0.20 kg

Devolución
Sí

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

Type-C USB 5V 2A Boost Converter Step-Up Power ModuleSpecifications:Input Voltage Range: 5 ~ 5.5VCharging Cut-Off Voltage: (4.2v/4.35v) ± 0.5%Charging Current: 2.4a ± 5%Boost Output Voltage: 5V ~ 5.15v (Line Loss Compensation)Boost Output Voltage Ripple: 100mVBoost Output Current: 2ABoost Conversion Efficiency: 92.5% (3.6V Input, 5V 2A Output)Static Current at Battery End: <30uAFeatures:1. When the load current is less than 50mA continuously, the output will be turned off.2. Support external key, connect the key to K point and output negative pole,short press to turn on power display and 5V output, continuous3. Two short presses will turn off the power display and turn off the 5V output.4. When the charging current drops to 100mA after reaching the final floating charge voltage, the charging cycle will be automatically terminated.5. When the battery voltage drops below 4. 1V, the charging cycle starts again.6. When the battery voltage is lower than 2.8V, the battery will be pre charged at 1 80mA.7. Usb-a base welding position is provided on the back of the product, which can be installed manually.8. It supports discharging while charging.Package Included:6pcs USB Type-C 5V 2A Boost Converter Lithium Battery Charging Protection Board(USB Welded)

Producto prohibido

Este producto no está disponible

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

Type-C USB 5V 2A boost converter module is a charge discharge integrated module, It supports discharging while charging. Input voltage range: 5 ~ 5.5V; Boost output current: 2A; Boost conversion efficiency: 92.5% (3.6V Input, 5V 2A Output). External Key Design: The boost converter supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output. Charging Cycle: When the charging current drops to 100MA after reaching the final float voltage, the charging cycle will be automatically terminated;when the battery voltage drops below 4.1V, the charging cycle will restart. Charging Protection: When the load current is continuously less than 50mA, the output will be turned off; when the battery voltage is lower than 2.8V, the battery will be pre-charged with a current of 180mA. You will get 6PCS USB Type-C USB C 5V 2A Boost Converter Lithium Battery Charging Protection Board Step-Up Power Module LED Display for DIY Charger (USB is Welded)