Artículo: AMZ-B005EGP5Y6

Radio Design Labs

Radio Design Labs TX-MVX Manual Remote Controlled Video Switch - 2x1 - BNC

Detalles del producto
Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon
Viaja desde
USA

Sobre este producto
  • The TX-MVX is the ideal choice in installations where either a manual switch or an open-collector must switch video signals. VIDEO A is normally connected to COMMON. When the TRIG terminal is pulled to ground, VIDEO B is connected to COMMON and VIDEO A is disconnected. The TX-MVX utilizes a high-quality RF relay allowing the module to either route a single video source to one of two destinations, or switch two video sources to a single video destination. The actual switch (or other module actuating the switch action) may be located remotely from the TX-MVX. Many RDL modules feature an open-collector SLAVE control terminal. These terminals may be used to control the TX-MVX. Alternatively, relay contacts on other equipment may also be used to control the TX-MVX. For example when used with other RDL modules, the TX-MVX could switch video: using audio detection (ST-ACR) from an external audio source using video detection (TX-VCR) from another video source at a prescribed time during a power-up sequence (RU-SQ6A) from logic signals (ST-LCR) using wall-mounted remote controls (RT2 or RC2-ST) Use the TX-MVX individually in NTSC or PAL systems, or combine it with other RDL products and various mounting accessories as part of a complete audio/video system.
$472,36
55% OFF
$214,71

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

$472,36
55% OFF
$214,71

20% OFF adicional al pagar con Deuna

Envío gratis
Llega en 26 o más días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en

Conoce más detalles

The TX-MVX is the ideal choice in installations where either a manual switch or an open-collector must switch video signals VIDEO A is normally connected to COMMON When the TRIG terminal is pulled to ground, VIDEO B is connected to COMMON and VIDEO A is disconnected The TX-MVX utilizes a high-quality RF relay allowing the module to either route a single video source to one of two destinations, or switch two video sources to a single video destination The actual switch (or other module actuating the switch action) may be located remotely from the TX-MVX