Artículo: AMZ-B0DP25HDFC

DKARDU

DKARDU 20 pcs 18650 Charging Module Lithium Battery Charging Module 5V 1A Charger Board Micro USB with Protection Function with 26AWG red and Black Cable

Detalles del producto
Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
Condición
Nuevo
Producto de
Amazon
Viaja desde
USA

Sobre este producto
  • Specification: Input interface: Micro USB The input voltage: 4.35-6V (recommended voltage 5V) Charge cut-off voltage: 4.2V Positive and Negative 1% Maximum charging current output: 1000 ma The battery overcharge protection voltage: 4.28V Battery overcharge lifting voltage: 4.0V The battery discharge protection voltage: 2.5V Battery discharge termination voltage: 3.2V Battery overcurrent protection current: 3A The board size: about 25mm * 16.5mm Power Indicator: Red for charging, Green for fully charged. High voltage protection: when the voltage is higher than 5V, the current will be lower than 1000mAh.It subtracts the charging current automatically to avoid burn damage to chip. Note 1.Please check all connections before charging, it will be damaged directly if the load OUT terminal on the positive and negative with wrong polarity. 2.Charging current is better to be 37% of the battery capacity.If you want to charge a battery of 1000mAh, 400mAh current will be enough. 3.When you uses Phone charger to charge, the current input should be up to 1A or more than 1A, otherwise it can not be in normal charged. Package Includes: 20 x Micro Lithium battery charging module 1 x 26AWG red and black cable 50 cm each
$16,47
31% OFF
$11,36

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

$16,47
31% OFF
$11,36

20% OFF adicional al pagar con Deuna

Envío gratis
Llega en 5 a 12 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en

Conoce más detalles

【What it does】: The lithium battery charging module adopts the Micro USB female socket design, which can directly input the rechargeable battery with the mobile phone charger, and still retain the input voltage wiring pad, which is convenient for DIY. 【Power Indicator】: The onboard power indicator light of the module, red means charging, green means fully charged. 【Specification】: Input voltage: 5V, charging cut-off voltage: 4.2V±1%, maximum charging current: 1000mA, battery over-discharge protection voltage: 2.5V, battery over-current protection current: 3A. 【Note】: When the battery is connected for the first time, there may be no voltage output at the OUT terminal.It is necessary to connect 5V to the power input terminal to charge it and activate the protection circuit.When using a mobile phone charger for power supply, it must be able to output more than 1A, otherwise it may not be able to charge normally. 【Application】: Module comes with integrated protection.Widely used in 16850 battery charging, 3.7V lithium battery charging.