Artículo: AMZ-B07G58V8RV

SKF

SKF F4B 200-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 2" Bore, 5-1/8" Bolt Hole Spacing, 9800lbf Dynamic Load Capacity

Detalles del producto

Disponibilidad
En stock

Peso con empaque
3.61 kg

Devolución
Sí

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

This SKF F4B-RM series ball bearing flange unit has a cast iron housing with four bolt holes, contact seals, and setscrew lock. It is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The housing is made of cast iron for rigidity and vibration damping, and is equipped with a grease fitting on the outer surface for reapplying lubricant. The SKF YAT 2 series double-sealed, deep-groove ball bearing insert in the housing accepts radial, thrust, and combined loads and has an extended inner ring on one side for increased shaft support. Its inner and outer rings and balls are made of high-grade carbon-chromium steel for durability and resistance to deformity. This self-aligning bearing has a convex sphered outer surface that compensates for misalignments. Seals on both sides of the bearing retain lubricant applied at manufacture and help protect against contaminants. The bearing locks onto the shaft with two setscrews spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. Contact seals on both sides of the bearing protect against contaminants and retain lubricant applied at manufacture and the bearing housing has a grease fitting for reapplying lubricant. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment, among many others.

$265,93

49% OFF

$136,37

$265,93

49% OFF

$136,37

Envío gratis

Llega en 12 a 16 días hábiles

Tienes garantia de entrega

Medios de pago

Cantidad

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads Set screw locking for secure attachment to shaft Contact seals on both sides of the bearing keep lubricant in and contaminants out Grease fitting on the housing for reapplying lubricant

SKF F4B 200-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 2" Bore, 5-1/8" Bolt Hole Spacing, 9800lbf Dynamic Load Capacity

Conoce más detalles