VG638 Retaining Compound, High Strength Cylindrical Adhesive for Bearings, Shafts & Gears - Fills Gaps up to 0.25mm, Restores Worn Parts, Green Anaerobic Glue, 50ml

Size:

VG638

VG601

VG603

VG638

VG648

VG680

Style:

1 Pack

4 Pack

Detalles del producto

Disponibilidad
En stock

Peso con empaque
0.20 kg

Devolución
Sí

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

Product Overview: The VG638 is a high-strength, high-viscosity retaining compound designed for the bonding of cylindrical fitting parts. It is engineered to cure when confined in the absence of air between close-fitting metal surfaces. Why Choose VG638? Unlike standard retaining compounds, the VG638 is formulated to bridge larger gaps (up to 0.25mm). This makes it the perfect solution for repairing worn assemblies where the shaft or housing has been damaged by fretting or corrosion. Technical Specifications: Model: VG638 (Green Liquid) Max Gap Fill: 0.25mm (0.01") Viscosity: High (Thick liquid, stays in place) Fixture Time: 5-10 Minutes (on Steel) Full Cure: 24 Hours Temperature Range: -55°C to +150°C Application Guide: Clean: For best results, clean all surfaces (external and internal) with a solvent-based cleaner to remove oil and grease. Apply: Apply adhesive to the leading edge of the pin and the inside of the collar. Assemble: Assemble parts with a rotating motion to ensure good coverage. Wait: Allow to cure. Do not disturb the assembly for at least 30 minutes. Disassembly Instruction: Apply localized heat to the assembly to approximately 250°C. Disassemble while hot.

$35,31

55% OFF

$16,05

$35,31

55% OFF

$16,05

Envío gratis

Llega en 5 a 12 días hábiles

Con envío

Tienes garantia de entrega

Medios de pago

Cantidad

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

[MAXIMUM GAP FILLING & REPAIR] :Designed for bonding cylindrical fitting parts, specifically where gaps approach 0.25mm (0.01"). Ideal for restoring fit to worn shafts, spun bearings, and loose keyways without remachining. High viscosity prevents run-off during application [PERMANENT HIGH STRENGTH] :Provides a robust, permanent bond that withstands heavy shock and vibration. Designed for dynamic loads. Note: This is a high-strength formula; disassembly typically requires localized heat (approx. 250°C/482°F) and hand tools [FAST FIXTURE TIME] :Sets in 5-10 minutes on active metals (Steel, Iron), allowing for quick adjustments and assembly. Full functional cure is achieved in 24 hours. Helps reduce downtime for critical equipment repairs in automotive and industrial settings [METAL-ONLY APPLICATION]:Formulated exclusively for active metal surfaces. For passive metals like aluminum or stainless steel, a primer is recommended to accelerate cure. IMPORTANT: Do not use on plastic parts or oxygen-rich systems [BOTTLE DESIGN NOTICE] :Net content is exactly 50ml. The bottle is designed with specific air space (half-filled appearance) to maintain the stability of the anaerobic adhesive and prevent it from hardening inside the bottle