Artículo: AMZ-B07VYSYFGH

BSI / Taytools

BSI / Taytools Bob Smith Industries Combo Pack with 1 OZ Thin Viscosity Insta-Cure TM Cyanoacrylate CA Super Glue and 2 OZ Accelerator Insta-Set TM

Detalles del producto

Disponibilidad
En stock

Peso con empaque
0.20 kg

Devolución
Sí

Condición
Nuevo

Producto de
Amazon

Viaja desde
USA

Sobre este producto

Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while applying the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on soft, porous woods since they penetrate into the wood and form more than just a surface bond. INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET (TM) in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET (TM) significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET TM) can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET (TM) is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

$56,02

49% OFF

$28,73

$56,02

49% OFF

$28,73

Envío gratis

Llega en 12 a 16 días hábiles

Tienes garantia de entrega

Medios de pago

Cantidad

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

Set includes 1 ounce bottle of medium viscosity (Insta-Cure + TM) Cyanoacrylate CA Super Glue 2 ounce bottle of Accelerator (Insta-Set TM). Insta-Cure+ is a BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps. INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly. CA glue comes with fine tip applicator 100% made in the USA!!

BSI / Taytools Bob Smith Industries Combo Pack with 1 OZ Thin Viscosity Insta-Cure TM Cyanoacrylate CA Super Glue and 2 OZ Accelerator Insta-Set TM

Conoce más detalles